A forklift truck will front load stacks of pallets into the magazine of the dispenser until it rests on two 5' x 5' roller rails. These two rails are located inside the magazine at each side. The dispenser is supported directly above the conveyor by four legs straddling the outside of the conveyor frame. Air operated retractable pins will enter the side openings of the second pallet from the bottom. It will then raise the remaining stacked pallets from the bottom pallet, leaving just the outer edges of the bottom pallet resting on the roller rails. The pallet shuttle system has pneumatically driven pegs located at the front of the rail system. These pegs will push the bottom pallet out through the letter box opening in the rear of the dispenser. The pallet will be riding on the roller rail shuttle system where it will be pushed onto the conveyer system at an equal height. When a pallet is removed from the conveyor, the control device detects an empty space on the conveyor line and will dispense another pallet and advance a pallet to the empty space on the line. The fully automatic pallet dispenser is designed to adapt to a broad range of commercially available conveyors.

• Allen Bradley MicroLogic 1000 has 20 inputs and 12 outputs.
• There are 3 unused I/O which can be utilized. For example we can accept signals from the customers conveyor controller.